Setting the new pace for hay bale production, the Marcrest 210 Baler eliminates the productivity bottleneck of traditional balers and provides the first Bale Baron 5250 integrated windrow-to-bundle system for high-volume small bale production that’s ready for market all in one step. With only one operator, a single tractor and the complete Marcrest system, you can now bale and bundle.
Specifications
| Bale Size | 14″ x 18″ |
| PTO speed | 540 rpm |
| Flywheel | 475 lb. (215 kg) |
| Camless Pickup | Standard |
| Pickup Width | 78″ (198 cm) |
| Pickup Drive | Variable Speed Onboard Hydraulic |
| Pickup Tine Bars | 5 |
| Pickup Windgaurd | Spring Adjustable Swath Roller with Tines |
| Pickup Gauge Wheels | 16/6.5-8 Foam Filled Swiveling |
| Auger Protection | Racheting Torque Limiter |
| Auger Drive | #60 Chain |
| Rotor Protection | Auto-Reset Torque Limiter |
| Rotor Drive | Gearbox |
| Stuffer | 3 Tine Crank Type |
| Stuffer Drive | Gearbox |
| Stuffer Protection | Shearbolt |
| Plunger Speed (540) | 120 Strokes/Min. |
| Plunger Protection | Auto-Reset Torque Limiter |
| Knotters | 3 Tailless |
| Knotter Protection | Shearbolt |
| Knotter Fan | Auto-Reversing Hydraulic |
| Twine Storage | 21 Balls |
| Chamber Tension | 3-Way Onboard Hydraulic |
| Tires | 19/45-17 |
| Suspension | Standard Rubber Block |
| Onboard Hydraulic System | Standard ( Pickup Drive, Bale Tension, Knotter Fan ) |
| Baler Weight (approx) | 11,000 lb. (4,989 kg) |
| Hitch Weight (approx) | 1,700 lb. (771 kg) |
| Minimum HP Requirement | 125 hp ( 165 hp for baler and 5250 Bale Baron ) |
| Minimum Tractor Weight | Tractor must be greater than baler weight (or total towed implement weight) |
| Tractor Hydraulics | 1 single acting (for pickup lift) |
Features
Variable Speed Camless Pickup
The ground speed matched camless pickup head feeds the double auger and rotor for combined superior feeding efficiency.
Triple Rasspe Tailless Knotter
The triple tailless knotter is designed to create a stronger knot without the use of a knife arm.
Pick-up Head Swivel Wheels
Supporting the pick-up head are two swivel wheels with adjustments for consistent minimum ground clearance.
In-Cab Control Panel
Using the LCD screen display, the in-cab tablet provides fingertip control of all baler functions.
Auto-Reset Driveline Clutch
Protecting the entire baler from power overload without using shear pins is the auto-reset clutch. Simply slow down RPMs to allow the driveline to re-engage and then continue baling as normal.
120 Strokes / Min
Packing in the hay fast and tight is the plunger running at 120 strokes per minute using the momentum of the large diameter 380-pound flywheel.
14” x 18” Bale Size
Producing bales in the standard 14” x 18” size, the 210 uses three strings to create consistent and uniform bales.
Onboard Hydraulic System
Self contained onboard hydraulic system for efficient and contamination free management of baler’s hydraulic functions.
Pass-Through Hydraulics
The 210 Baler provides hydraulic ports at the rear of the unit to easily connect the Bale Baron 5250 for streamlining initial setup.
250 Hour Grease Intervals
Designed with low maintenance requirements in mind, the 210 Baler features premium components made to last with minimal servicing needed.
Full Access Shields
Top and side shields fully open to easily access all components. The stuffer, rotor and chamber also have dedicated clean-out doors.
21 Twine Spools
With a holding capacity of 21 twine spools, the 210 matches high-capacity baling with high-volume twine requirements for in-field efficiency.